Conversion Parts - Throttles

Original Curtis PB-8 Throttle

MSRP:

Was:

Now: $130.00
Curtis FP-6 Style Throttle - 0-5 Volt

MSRP:

Was:

Now: $125.00
Throttle Linkage Ball (PB-6)

MSRP:

Was:

Now: $10.50

Add to Cart
Domino Twist Grip Throttle - 0-5K Ohm - IP67 Rated (Dust & Water Resistant)

MSRP:

Was:

Now: $110.00

Add to Cart
Original Curtis PB-6 0-5K Ohm Throttle

MSRP:

Was:

Now: $150.00
CURTIS FP-2 FOOT PEDAL W/ SWITCH

MSRP:

Was:

Now: $265.00
Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k

MSRP:

Was:

Now: $225.00

Add to Cart
Magura Twist Grip Throttle 0-5K Ohm

MSRP:

Was:

Now: $72.00

Add to Cart
Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k (Non-Spring Loaded) for Boats

MSRP:

Was:

Now: $262.00

Add to Cart
Curtis FP-6 Style Throttle - 0-5K Ohm

MSRP:

Was:

Now: $125.00

Original Curtis PB-8 Throttle

The Curtis PB-8 has a 3-wire design to accommodate controllers with a 3-wire input, but also can be used on all 2-wire configurations and has the same footprint and mounting pattern as the PB-6. It was designed for cable actuation. The PB-8 is...

MSRP:

Was:

Now: $130.00
Curtis FP-6 Style Throttle - 0-5 Volt

Ideal for tough environments such as material handling. Curtis style foot pedals are used with Curtis electronic motor speed controllers, as well as models by other manufacturers. Designed for maximum installation flexibility and durability...

MSRP:

Was:

Now: $125.00
Throttle Linkage Ball (PB-6)

This ball can be attached to some throttles like the PB-6 as a throttle linkage.

MSRP:

Was:

Now: $10.50

Add to Cart
Domino Twist Grip Throttle - 0-5K Ohm - IP67 Rated (Dust & Water Resistant)

The Italian made Domino twist throttle is high quality with a five wire output and a built in micro switch for added safety. The potentiometer can be configured in a 2 or three wire mode outputting either 0-5K or 5K-0 ohm. The potentiometer in this...

MSRP:

Was:

Now: $110.00

Add to Cart
Original Curtis PB-6 0-5K Ohm Throttle

The PB-6 are out of production but the PB-8 is the same unit and you would just cap off the 3rd wire. Link to the PB-8. Curtis Style PB-6 The PB-6 is an input device between the Throttle pedal and the speed controller. Stainless case with...

MSRP:

Was:

Now: $150.00
CURTIS FP-2 FOOT PEDAL W/ SWITCH

5 k ohm 3-terminal pot with microswitchCable: 6 foot long, 5-wire unshielded, #22 AWGStroke: Spring-returned pedal, 1.75" travelMetal Parts: Satin finish black paint on steelFoot Surface: Non-slip rubberized surfaceDimensions: 9.0" L X 4.0" W X 3.75" D...

MSRP:

Was:

Now: $265.00
Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k

JR Merritt Joystick Pro4 Single-axis Throttle Control 0-5k Configuration: Joystick with knob handle. Spring return to center (off) position. Detent at neutral/center position. Microswitches for driving forward and reverse contactor coils are...

MSRP:

Was:

Now: $225.00

Add to Cart
Magura Twist Grip Throttle 0-5K Ohm

The Magura Twist Throttle has a 0-5k ohm output for Electric Scooter / Bicycle. Three wire output.Comes with matching grip for opposite side 7/8" handle bars68" long control cableWeight: 0.5 lbsBlue Wire = Throttle HighBrown Wire =...

MSRP:

Was:

Now: $72.00

Add to Cart
Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k (Non-Spring Loaded) for Boats

JR Merritt Joystick Pro4 Single-axis Throttle Control 0-5k - It Is Not Spring LoadedThis model does not have a spring return, and instead stays where you put it, which is useful for boaters and some other applications. Configuration: Joystick with knob...

MSRP:

Was:

Now: $262.00

Add to Cart
Curtis FP-6 Style Throttle - 0-5K Ohm

Ideal for tough environments such as material handling. Curtis style foot pedals are used with Curtis electronic motor speed controllers, as well as models by other manufacturers. Designed for maximum installation flexibility and durability. These pedals...

MSRP:

Was:

Now: $125.00