Motenergy ME-0913 Brushless DC Permanent Magnet Motor

Description

The ME0913 has been replaced with the M1306

This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer.

• Output Power of 12 KW Continuous, 30 KW Peak (at 96 volts)
• Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 96 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.
• This is a 4 pole motor (8 magnets).
• The Phase to Phase winding resistance is 0.013 Ohms.
• The maximum recommended rotor speed is 5000 RPM.
• Voltages from 0 to 96 VDC input to the control.
• Torque constant of 0.15 Nm per Amp
• The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
• Armature Inertia is 45 Kg Cm Squared.
• Continuous current of 125 Amps AC (180 Amps DC into the motor control).
• Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
• Weight of 35 pounds.
• Peak Stall Torque of 90 Nm (66 ft).
• This is an Open Frame, Fan Cooled motor.
• Timed for counter-clockwise rotation (can be changed to clockwise).