Alltrax SR-72500 Motor Controller
- Fan, Fuse & Mounting Hardware Included
- For Series and Permanent Magnet Motors
Features
- Color coded terminals
- 12-72 Volts
- 500 Amps Peak
- 575(Peak Amp Mode)
- Standard 4-spade
- Flexible USB programming
- Integrated heatsink mounts on any suitable surface
- Solenoid Control for Main DC Control
- Auto-throttle calibration for smooth operation
Specifications
- DC motor controller for series and permanent magnet motors
- ABS + PC510 flame resistant thermal plastic enclosure
- All copper heat sinks
- Sealed epoxy UL-94-VO / 5VA flame rating (best in industry)
- Adjustable undervoltage cutback 8-62 VDC
- Adjustable overvoltage shutdown 22-90 VDC
- Operating Frequency: 18k Hz
- Voltage drop @ 100amps: <0.18V
- Control voltage KSI keyswitch and reverse: 36-72V Nom, 90 VDC Max
- Powered Up Standby Current <0.02A (20mA)
- Relay solenoid drive output current: 5amp peak, 1.0A Continuous
Throttle Input Options
- ITS (inductive, E-Z-GO)
- 0-1K Yamaha
- Resistive 0-5K ohm (+/-10%) 2-wire and 3-Wire
- Resistive 5K-0 ohm (+/-10%) Club Car
- 0-5Volt
- 6-10.5Volt (Taylor Dunn)
Options
- Programming cable
- Personality switch - 2 modes rocker or dial, to control speed for different users (coming soon)
 |
For Alltrax Data Sheets, see our FAQ and Documents. | |
2 Reviews
-
Easy installation
The service department was very helpful
-
Alltrax 72500
Really happy with the variability in the voltage settings. Only gripe is better instructions on the wiring. It has the diagram, but it doesn't show using the reverse connection for my cart, so having a hard time figuring out what I should do to be able to utilize the controller for reverse power (settings to lower power in reverse).
