Alltrax SR-48400 Motor Controller
- For a G8, you need to check your throttle to see if it is a 0-1k ohm or 0-5k ohm unit.
Features
- Color coded terminals
- 12-48 Volts
- 400 Amps Peak
- 460 (Peak Amp Mode)
- Standard 4-spade
- Flexible USB programming
- Integrated heatsink mounts on any suitable surface
- Solenoid Control for Main DC Control
- Auto-throttle calibration for smooth operation
Specifications
- DC motor controller for series and permanent magnet motors
- ABS + PC510 flame resistant thermal plastic enclosure
- All copper heat sinks
- Sealed epoxy UL-94-VO / 5VA flame rating (best in industry)
- Adjustable undervoltage cutback 8-30 VDC
- Adjustable overvoltage shutdown 22-62 VDC
- Operating Frequency: 18k Hz
- Voltage drop @ 100amps: <0.18V
- Control voltage KSI keyswitch and reverse: 36-48V Nom, 62 VDC Max
- Powered Up Standby Current <0.02A (20mA)
- Relay solenoid drive output current: 5amp peak, 1.0A Continuous
Options
- Cooling fan & encloser (increased performance)
- Programming cable
- Personality switch - to control speed for different users.
 |
For Alltrax Data Sheets, see our FAQ and Documents. | |
