The ME1003 (ME1909) is a same motor as the ME0709 but it has a double brush set to handle 200 amps continuous. This ME1003 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. For voltages from 12 to 72 VDC input and 200 amps continuous (400 amps for 30 seconds) @ 72 Volts. Designed for battery operated equipment. For more information, see the Performance Information section. This motor has similar performance to the Lynch, Lemco, and AGNI motors.
| Power | 11.5KW continuous, 20KW Peak for 30 seconds @ 72Volts |
| Voltage | 12-72 Volts |
| Speed | 3700 rpm at 72V Unloaded |
| Size | 8" OD, 7.42" long (w/o shaft) |
| Shaft | 7/8"x 1-5/8", 3/16" key Timed for counter-clockwise rotation (can be changed to clockwise) |
| Weight | 36 Lb. |
We recommend that you use an Alltrax SR72400 Controller with this motor & a solenoid that is rated for 400 amp continuous like the SW200 with the appropriate diode & pre-charge resistor.
