This cable connects your E-Z-Go PDS motor speed sensor with the stock motor controller or Alltrax controller.Cross Reference Numbers:Nivel 3228Some of the Nivel motors that can be used with this harness:7146,D1162,3267,3268Plug also works with Yamaha...
Eaton's Bussmann Series ANN-600 ANN Low Voltage Limiter Fuse
Category: Bolt-Down Fuses
Style: Bolt-Down FusesVoltage Rating: 125VAC, 80VDCBolt-down design for high-vibration applicationsFor high-current applicationsVery fast-acting...
Eaton Bussmann series JJN fuse T-TRON
Current-limiting very fast acting fuse, VFDline protection, 400 A, Class T, Non-indicating, Bolted blade end x boltedblade end, 20 kAIC at 160 Vdc|200 kAIC at 300 V, Standard, 1, 300V, 160Vdc
USB A to B for use with Alltrax controllers.
Link to the Alltrax Toolkit software.
Sample of the Alltrax Toolkit
Alltrax Inductive Throttle Sensor Filter for SPM, XCT & SR Controllers. This is needed for correct throttle signals between your ITS sensor and the controller.KIT-Filter-SR-EZGO
Cart side plugs for the E-Z-GO PDS. These will plug into the Alltrax XCT48*** PDS motor controller.You need a Molex Jr Fit crimping tool for these pins to do a good job.
Alltrax Controller Pro Software
AXE & DCX ControllerPro.exe
Build 39 for 2006 and newer
USB Driver for Win 7 Vista 32 &_64bits
USB Driver for Win Vista 32 &_64bits
USB Driver Driver for Win 2000 &_XP
USB Drive for...
Run / Tow Switch, Toggle, E-Z-G-o RXV
400 Amp Battery Fuse Use with
450 to 650 Amp
400 Amp Rating5/16" Slot Terminals
250 Amp Battery Fuse Use with
200 to 400 Amp
Controllers250 Amp Rating 5/16" Slot Terminals
Run / Tow Switch, Toggle PDS, DCS, E-Z-Go TXT
This universal mounting adapter plate and solenoid bracket is for the Alltrax XCT & SR motor controllers. Includes Stainless Steel mounting hardware.Typically the stock controller box cover is removed. The plate adapts the bolt holes, and the bracket...
battery fuse holder to protect the wiring
and batteries against short circuitsANN Type Fuse Holder - will also hold ANN, CNN, CNE, ANL, & ANE. Accepts fuses from 35 amps to 800 amps.The base is made from solid high ...
Bussmann CHM Midget Fuse Box - 10x36This is a special purchase. Limited quantities available.600V30AFits 10x38 Fuses (BLN10)
Alltrax Regen Diode - For EZ-G0 DCS, PDS TXT-48V & Club Car IQThis is required for Alltrax XCT controllers on a variety of vehicles for the correct operation of the regen system.New XCT controllers come with his diode.
© 2023 EV Drives
Powered by BigCommerce
All rights reserved.