Previously Installed - This unit was installed, and splashed with something that discolored the plastic. It was fully tested by Alltrax and comes with the full 2 year warranty. It has the white discoloration all around and on the underside, and it has a bit of dirt on it.
Although it says Yamaha on the label, we will program it for any throttle type, and this will work with any series or permanent magnet motor.
Features
- Color coded terminals
- 12-48 Volts
- 400 Amps Peak
- 460 (Peak Amp Mode)
- Standard 4-spade
- Flexible USB programming
- Integrated heatsink mounts on any suitable surface
- Solenoid Control for Main DC Control
- Auto-throttle calibration for smooth operation
Specifications
- DC motor controller for series and permanent magnet motors
- ABS + PC510 flame resistant thermal plastic enclosure
- All copper heat sinks
- Sealed epoxy UL-94-VO / 5VA flame rating (best in industry)
- Adjustable undervoltage cutback 8-30 VDC
- Adjustable overvoltage shutdown 22-62 VDC
- Operating Frequency: 18k Hz
- Voltage drop @ 100amps: <0.18V
- Control voltage KSI keyswitch and reverse: 36-48V Nom, 62 VDC Max
- Powered Up Standby Current <0.02A (20mA)
- Relay solenoid drive output current: 5amp peak, 1.0A Continuous
Throttle Input Options
- ITS (inductive, E-Z-GO)
- 0-1K Yamaha
- Resistive 0-5K ohm (+/-10%) 2-wire and 3-Wire
- Resistive 5K-0 ohm (+/-10%) Club Car
- 0-5Volt
- 6-10.5Volt (Taylor Dunn)
Options
- EZGO Mounting Adapter Kit
- Cooling fan & encloser (increased performance)
- Programming cable
- Personality switch - to control speed for different users.
 |
For Alltrax Data Sheets, see our FAQ and Documents. | |
