Alltrax XCT-48500-OEM-G19 Motor Controller 24-48 Volts
This is Alltrax's newest line of regen (shunt wound) separately excited motor controllers.
Features
- XCT48500
- 500 Amps
- 24-48 Volts
- Throttles Supported:
- ITS (inductive, EZ-Go)
- 0-1K Yamaha
- Resistive 0-5K ohm ( +/- 10%) 2-wire and 3-wire
- Restistive 5K-0 ohm ( +/- 10%) Club Car
- 0-5 volt
- 6-10.5 volt (Taylor Dunn)
- USB Throttle (New - Software communication driven)
- Absolute mode
- Direct Yamaha Connection - No Adapters
- Auto Throttle Calibration
- USB Programming With Free Software
Specifications
- DC motor controller for separately excited motors (not series)
- ABS + PC510 flame resistant thermal plastic enclosure
- All copper heat sinks
- Sealed epoxy UL-94-VO / 5VA flame rating (best in industry)
- Adjustable undervoltage cutback 16-30 VDC
- Adjustable overvoltage shutdown 30-60 VDC
- Operating Frequency: 18k Hz
- Voltage drop @ 100amps: <.18V
- Control voltage KSI keyswitch and reverse: 36-48V Nom, 62 VDC Max
- Powered Up Standby Current <.02A (20mA)
- Relay solenoid drive output current: 5amp peak, 1.0A Continuous
- Power lead bolt thread size = 5/16ths
Included
- Fuse
- Operators Manual
- 5/16ths Power Lead Bolts
- Cooling Fan & Housing
 |
For Alltrax Data Sheets, see our FAQ and Documents. | |
