D&D ES-65-14 Golf Cart Motor, Club Car IQ & PD Plus (Sepex), Speed & Torque
- For Club Car IQ & PD-Plus
- Speed Motor with good torque
- Speeds up to 22 mph
- Approximately 50% increase in torque with a 500 amp controller
- Shunt Motor with Regen 48 VDC
- 10 hp peak
- 10 Tooth Female Spline
- Length 9.75 inches long, 10.5" with speed sensor
- Weight 58 lbs
|Club Car PD PLUS, IQ, XCT
|Alltrax Model||Approx Speed MPH||Approx % Change in Torque|
|Speed with Stock Tires||XCT48400||18-24||10|
|Speed with Stock Tires||XCT48500||18-24||20|
Vehicle performance specifications are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH.
Itâs recommended that you upgrade wiring throughout the golf cart to a minimum of 4 AWG and a contactor that is rated for 400 amps continuous.
Alltrax has come out with a new set of field maps for the XCT Controllers to maximize the performance of these motors. If you wish to use your current controller it needs to be updated to this new field map or it could cause failure to both the motor & controller. You are welcome to send your controller to us to be programmed for a fee of $15 to pay for shipping the controller back to you.
* (Reference: D&D Motors Specification)
Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.